Silopath, Author at Silo Path

How to use Photoshop Clone Stamp Tool

by Silopath | Nov 26, 2021 | Tips

What is Photoshop’s clone stamp tool?

The clone stamp tool is one of the most necessary tools in Photoshop. It’s a basic Photoshop tool. It can help you to remove any unwanted object from your photo. Also, you can add a duplicate item to the image. It can do pixel to pixel clone in adobe Photoshop. Healing brush tools and clone brush tools are different from each other. The clone stamp tool paints one portion of an image over another section of the same photo. You can also paint a part of one layer over an additional layer. The clone stamp tool is also called a rubber stamp tool. For a minor change in your photo, you can use this tool.

When do you have to use the Clone Stamp tool in Photoshop?

If you are a regular based Photoshop user, then you know about the clone stamp tool. Photoshop has a lot of tools for adjusting minor faults in a photo. The clone stamp tool is also useful when you use the exact detail and color from one portion of the photo to another portion. This tool is not used for image retouching. For removing spots and power lines, the Photoshop stamp tool is the best one. There have a lot of situations in a photo where you have to use this tool.

Those are:

Remove people from the background.
Remove the car that’s in the wrong place in your photo.
Remove mazing street sign from an image.
Remove Mazing photoshop shadow effect from the image.
Remove undesirable reflections from your photo.
Remove people walking through in your photo.

Those are just a very few applications where you have to use this tool. There has a lot of conditions where you have to use this tool must. Mainly when you need Photoshop remove object, you have to use this tool as well. The main advantage of using this tool is replacing pixels and constructs retouching unnoticeable.

How to apply the clone stamp tool in Photoshop?

Photoshop stamp tool is a simple tool in Photoshop. Also, this tool is easy to use. First, you have to say Photoshop two things. Those are:

The targeted area you want to remove.
The place from where Photoshop supplies replacement pixels.

So, if you want to remove any object from a photo. You have to tell this Photoshop that where you want to remove and from where you want to take replacement pixels. Now, I will describe to you step by step that how you can use the clone stamp tool.

Step 1: Have to select the Clone Stamp tool

First, you have to select the clone stamp tool from the tool panel. You can find this tool on the left-hand side of your screen. This tool will be looking like a rubber stamp. After selecting the tools, click on the brush menu dropdown. You have to set the size and hardness of the brush in this section. Hardness and brush size depends on the tour photo.

Step 2: Choose the source area

This is a simple but very important part of using this tool perfectly. The source area is the area from there you will use the source replacement pixels. So, you have to choose this carefully. Take your cursor to the source area and hold the ALT key on the keyboard. Your cursor will become a target. Now, do a click on it. You have done this step perfectly by selecting the source area.

Step 3: Paint on the target area

Now release the ALT key from the keyboard and pass your mouse over the area you want to remove. Hold down your mouse button and cautiously paint over the new pixels. You just did it. It sounds too much easy, but there have a lot of things to understand. Mostly if, you want to be an expert in Photoshop clone stamp tool. Also, you have to follow some tips and tricks for this.

Step 4: Take a new layer

You want to change a photo with the clone stamp tool, always try to take a new layer. After that, you have to make sure your adjustments all happen on this layer. There have a lot of reasons that you have to take a new layer. Photoshop layers are nondestructive. So, the changes layer won’t change the radical pixels of your photo. The changes are done but, you don’t like it.

Then you can delete the layer and can do it again. That’s a benefit of a new layer. You can apply coordination’s in a specific area if it’s in a new layer. Creating a new layer is so easy. Just press CTRL/CMD + J for a duplicate of your current layer. On the other hand, press SHIFT+CTRL/CMD+N to take a blank layer.

Step 5: Zoom in your photo

When you are working with the clone stamp tool, you have to zoom in on your photo. I recommend you zoom the photo while you are working on an image. Zooming will help you to separate the area you are working in an image. It will give more accuracy and exactness. You can make your change as good as you can. The variation will blend in perfectly when you do zoom out.

There has a shortcut for zooming quickly. Press the ALT/OPTION key in your keyboards and scroll your mouse to zoom in and zoom out. There has another option too to do this. You can press CTRL/CMD and + or – key on the keyboard. It will do the same. In this way, you can do zoom in and zoom out quickly.

Step 6: Set your brush shape

You need to change the size when you do work with the clone stamp tool in Photoshop. In a single image, there have a lot of portions where you have to change the brush size. Large changes need the brush size big. Another hand, small changes need a smaller size brush. For example, you are doing jewelry photo editing. Jewelry has a lot of angles where you need to resize your brush lots of times. There are also having some shortcuts for doing this work simply. If you press the left bracket key [it will make the brush smaller. Same if you press the right bracket key], it will make the brush larger. By using this, you can do your work easily and quickly.

Step 7: Set the right brush hardness

The clone stamp tools allow you to set your hardness as you want. Just open the brush panel and set your brush hardness as you need. Hardness determines the quantity to which you’re cloning will combination in with the encircling pixels. If they make it 100% then clone edge will be hard. Also, if you will make it 0% then the edge will match with the neighboring. The hardness level is 0%, which makes your photo-real. But the hardness level is 100%, which makes the photo look unnatural. You have to be careful about this when you will select brush hardness. Set your brush hardness compared with your selecting area in the image. It will help you to blend the pixels easily.

Step 8: Clone earlier than making different adjustments

I recommend you do cloning before adjusting contrast, color, etc in your photo. When you apply the clone stamp tool after adjustment layers, it will be permanent in your photo when you clone it. You will face a problem when you want to remove some of your adjustments. Sometimes, you need to clone but you already make changes in the adjustment layer. So, this situation will create a problem for you. Make a decision before doing this in a photo. In the clone stamp tool options bar, just select the circle with a line. Then Photoshop will overlook the adjustment layer when you will do the clone.

Step 9: Save your work

Now, it’s time to save the file. After finishing the work this is the last step. You have to save the file in PSD or TIFF format. If you want to keep the position of the individual retouching layer you created. A clone stamp tool is a fabulous tool. To get rid of imperfection or copy photo elements. You don’t need to use this tool for photo retouching. For adding some special effects you have to use this tool. You can make your photo more professional by adding or removing objects from a photo. Practice a simple project like dust spot from a photo first. When you will be professional then try others like object remove.

Conclusion

In the above, I am trying to describe the clone stamp tool briefly. It will help you to do a project based on the clone stamp tool. You can’t do a high-level project by this. But I make sure that; you can do a simple project by following this. If you do practice a lot on this tool then you can be a master on this. It’s not blending pixels like the Spot Healing Brush tool. This tool will give you whole control over it. Use this tool when it is necessary or suddenly needed.

Using the clone stamp tool is a very raunchy process. Don’t worry if you make a mistake for the first time. There is no magical clean method. You have to do practice a lot for doing this work perfectly. You have to do a lot of experiments, problem-solving and need a lot of determination. Take your time and keep practicing.
If you have any more ideas about the clone stamp tool then comment below. It will help us and the readers too.

Step by step guide on how to hair masking in Photoshop

by Silopath | Nov 20, 2021 | Basic Service

Hair masking Photoshop is one of the most using topics for image edit. Photoshop has a large number of tools that cut objects out of images. It’s not a basic Photoshop job. Strands of hair are going in multiple directions in the photo. So, you can try a selective to cut out the background.

Cutting out hair from Photoshop is not so much hard if you know some tricks. Select tool and mask tool is one of them. Hair masking Photoshop makes an image look more beautiful. This hair masking cut down the unnecessary part of the hair which makes the photo dull. Headshot attractiveness sometimes depends on hair. As much as you can do the image masking smoothly, the image will look better.

What is a hair mask?

Hair masking service is a part of Photoshop masking service. Hair masks mean cutting out the hair from an image which makes the image look destructive. Do hair masking Photoshop experts have to use the select and mask tool. Those tools automatically select the edges. In model photography, hair masking services are used widely. If your hair is looking fatherly and wild in a photo. Probably you can get a negative review for that. But if you know Photoshop hair masking service then you will not face this problem.

Photoshop hair masking service replaces your photo ordinary to extraordinary. By Photoshop hair masking you can mask a particular portion of hair in an image. It’s a very useful issue about this tool in Photoshop. Hair masking Photoshop does the very same work as in real life. There is various type of tools for hair masking in Photoshop. You can do as you like. At the time of the photo shoot, the model faces various types of disturbances. For this reason, photos are not looking well as you want. This hair masking service helps you in this situation.

How to do hair masking in Photoshop?

Image retouching is a part of photo editing and masking is a class of this retouching. Hair masking in Photoshop is an advanced technique and has to use the various tool. Using the select and mask tool in Photoshop, you can do it. Photoshop CS3 and CS5 have some differences in masking. You have to be careful during work in Photoshop about this.

CS5 added some new features related to the photo masking service. Following all of the instructions on hair masking, you can do it perfectly. Hair masking in Photoshop is not rocket science. If you want to make your own how to mask in Photoshop then follow this step. Just need to have knowledge about hair masking tools and practice them. I will try to describe the simple way of doing hair masking in Photoshop below. By following those instructions, I hope you can do a simple project without hesitation.

Step 1: Open your model photography images in Photoshop CC 2021

Firstly, you have to open your model photography photo in Photoshop CC 2021. To open this, go to file and then open. You will get a window box. From there, you can search your photo to open it. Select the photo from the window for hair masking service and click on open. The image will be open in Photoshop. There has another option too. You can also drag a photo from a folder or windows and desktop. Now the second step is quick selection. Step by step you are going to know about hair masking briefly. Following those instructions, you can do simple hair masking. Making your headshot or regular image more attractive, you can use this hair masking tool.

Step 2: Select the quick selection from the toolbar

By doing hair masking in Photoshop, you can use verities of tools. The select and mask tool is one of them. You can do work faster with these two tools. You can also use the Photoshop clipping path for this. To do that, first, select a quick-select tool from Photoshop. Point the tool to the background while pressing the shift key; pull it all over the surroundings.

Step 3: Make a selection

Following the above instruction, you get a selection of photos. Don’t worry about the perfection of choice. Just get a regular selection of hair in the image. You can see dots around your photo area. That means the selection has been made. Now go in another step.

Step 4: Fill the Selection

Go forward and upturn the selection. So the person and person’s hair are only selected. The background of the photo is not selected yet. You have to use the SHIFT, CONTROL and I keys to do this selection. The whole area you have work will be selected by this. You fill the selection this way.

Step 5: Create a mask

Now you have to create a mask of rough selection. Tops into the layers window and click the icon to add a vector mask in the lowest part. It will look like a rectangle with a circle inside. If you click to add a mask, a second box you can see in the layer icon. You can see a black and white mask in your clipping.

Step 6: Refine the selection and mask

In this section, you had a hair mask. And it’s not good enough. You just made a layer yet but did not do anything with this. The mask will be looking like transparent or semi-transparent background. Now you can use the refine tool to make your selection more exact than before. In the toolbox, you can find it on the left side. If a plus icon is in a brush in the middle, you are selecting the tool correctly.

You can add this to the selection. Can added hair which you missed in the first selection. On another hand, with a minus icon in a brush, you can remove any part from the selection in Photoshop. For changing the mode, you can hold down the control or use the icon on the right side too. Using a semi-large brush, you can do the work as well. With more accuracy, you can zoom the photo and take a small brush for this. The mask and select tool can detect the edge on its own. Even the semi-transparent edge can also be detected by this tool. A busier background will need more accuracy with a small brush tool.

Step 7: Adjusting with the mask

Still, your mask needs a little bit more corrective than a paintbrush is your second option. Have to click on the paintbrush from the mask and use it for more refining. Want to back your default color to black and white. Press down D on your keyboard for this. Paint white by paintbrush include in the mask and paint black for excluding from mask. Select and mask tools typically do better work for masking. Large area and straight edges are easy to adjust by using the paintbrush.

Step 8: Remove Halos

Sometimes, hair masking leaves some edges which do not look good. Often a part that is brighter than surroundings, it’s called a halo. Have an option on your mask in the layers panel to pick the mask to remove that halo. If the mask selection is finished, now you have to select a contract. You have to select one pixel and click ok. It’s working only inside the mask.

Now it’s time to invert the selection. Causes have to choose the background option for this. You can use the keyboard as a shortcut. Windows users can use SHIFT, CONTROL, and I keyword for this. Mac users can use SHIFT, COMMAND, and I on the keyboard. Now, you have to fill the background layer with black. You can use SHIFT and DELETE for this. There has a pop-up window. Choose black from the contents and press down on it. Easily you can remove the halo by contracting the background by a pixel.

Step 9: Completed the hair masking

In the last of this process, you can see that not all hair is selected. But you do spend hours doing this perfectly. It’s also ok now. All of the hair is not possible to do a mask. Perhaps it will look better than raw photos. Using a paintbrush tool, select tools, mask tool can help you with hair masking. If you can use those tools perfectly then, it will be easy for you to do this.

Conclusion

Hair masking service is one of the painful jobs in photo editing service. Hair masking is widely used in model photography. It can increase the natural look of hair in the photo. It can increase the value of an image. If you do not have enough experts for doing this, then you can hire experts. We have a bunch of experts for doing this service perfectly. Following the above blog, you can do a hair masking job as well. A professional look is given by only an expert in photo hair masking service. Before doing this, make sure that you are expert enough for doing this work on your own.

How to draw straight lines in Photoshop and Draw Curved Lines

by Silopath | Oct 18, 2021 | Basic Service

If you want to know that how to draw straight lines in photoshop, you have to use a brush tool. First, you have to paint a spot and keep up the shift key. On the other hand, click where you want to end the line, Photoshop painting straight line from start to endpoint. By using this process you can draw straight lines Photoshop easily.

Also, you can use a Photoshop grid to make sure that your drawn line is straight. Drawing curved lines in photoshop, you have to select the pen tool first. Make position from where you want to start the curve line then hold down the mouse and first anchor

Point seems and the pointer switch to an arrowhead. Drag to set the level of the curve you are making then relieve the mouse. By following this, photoshop draw curved lines for you. Those are the way that draws straight lines and curved lines.

What is line tool Photoshop?

By conduct the Photoshop line tool you can stretch pixels, vectors, and paths too. Drawing a straight line in GIMP as usual as photoshop. You have to select a GIMP line tool first then follow the instructions as you did in photoshop. Click the point you want to start your line and hold the shift key. After that relive your cursor where your line will end. You can also precisely 40 to 90- degree angles a line by using the line tool. Line tool Photoshop is very necessary for professional who works based on photoshop. If you need the best visual outputs then you need to use line tool photoshop as well.

Where is the line tool Photoshop?

Line tool Photoshop is a tool of Adobe Photoshop. To choose the line tool photoshop, go to the main toolbar and hold your cursor on the rectangle tool. You will see a submenu from this with various shape tools. With choosing any shape you can draw straight line Photoshop. Also, you can do a line curved by this.

Here I am describing how to find a line tool. Follow the instruction to find line tool photoshop

Step 1: Open your adobe photoshop cc software

Do you have adobe photoshop or adobe photoshop CC on your computer then Double click. Another way is to click the start menu or click the keyboard windows button when saw your adobe photoshop apps. Double click on the adobe photoshop icon

Step 2: Create a new project

After opening Adobe Photoshop you click on the left upper side file section and open a new file there.

Step 3: Click on the toolbar

On the Second click on your toolbar which is left on your screen. On other hand, you can press P for the open line tool photoshop.

Step 4: Press rectangular toolbar

Second hold your mouse on the rectangular toolbar and a submenu drop down from there. You can find various shapes of tools.

Step 5: Select the toolbar from the tools menu

From various shapes from those tools, you can choose yours. You can draw straight line by this on photoshop.

How to Draw a Straight Line in Photoshop

Straight line drawing is the primary level in Photoshop. As it is primary but also necessary for designers. Drawing a straight line photoshop, you need a photoshop line tool. As described below if anyone follows this, they will get a clear concept about how to draw straight lines in photoshop. Also, you will be able to draw straight lines in Photoshop too.

Step 1: Find the line tools from the tools menu

Adobe Photoshop has a menu bar. On the left side of the Adobe Photoshop CC menu, you can find the line tool photoshop.

Step 2: Select the line tool in photoshop

Holding your mouse on the rectangle tool. From this, you can find various shapes of the line tool. You have to choose one for your work.

Step 3: Press shift and draw the straight line

Selecting the line tool you have to paint a spot first and hold the shift key. Also, click the ending point. Photoshop draw a line on your canvas. Using line tool photoshop you can draw straight lines easily. This is the easiest way for drawing a straight line.

Press the geometry option list arrow, and select from the following options

Then next click the geometry option list arrow and select from the following options

Arrowheads: – By selecting start and end you can create an arrowhead on line. It’s the first step for the geometry option.

Width: Choosing a percentage from (10 – 1000), to ordain the width of the arrowhead compare to the width of the line. You can measure the width of a line by this.

Length: Selecting a percentage from (10 – 5000), to ordain the length of the arrowhead. You can measure the length of a line by this.

Concavity: – Do Selecting a percentage from (-50 to +50), to ordain the Concavity of the arrowhead.
If you want to work on straight line picture, you have to follow those upper instructions as well.
Photoshop draw straight line and after that, you have can measure the line by those four instructions. Those options are too much helpful for Adobe Photoshop designers.

Arrowheads: – By selecting start and end you can create an arrowhead on line. It’s the first step for the geometry option.

Width: Choosing a percentage from (10 – 1000), to ordain the width of the arrowhead compare to the width of the line. You can measure the width of a line by this.

Length: Selecting a percentage from (10 – 5000), to ordain the length of the arrowhead. You can measure the length of a line by this.

If your drawing mode is active you can create any shape

When your drawing mood is active, draw inside mood allow you to draw inside any chosen object. By gimp line tool you can also draw a straight line as Adobe Photoshop. What you use to draw straight lines, it’s depending on in which way you feel comfortable. As draw straight lines Photoshop is an easy process to draw a straight line the same as gimp draw straight lines too. If you have a question that how to draw straight lines in gimp.

Just select your brush tool and click on starting point and your line begin, press the shift key, and also drag your cursor when your line will end. By this process, you can draw straight lines in gimp. Not only this, activating drawing mode, you can draw any shape your wish. Those are the benefits for activate the drawing mode. Straight lines in adobe Photoshop and Gimp are fully the same. Just they are two different platforms.

Get Free Trial And Justify Your Work Quality

Get a professional photo editing service at an affordable price. If you want to judge our work quality please send a free trial of 2/3 images

Get Free Trial

If your drawing mode is active you can create any shape

Why use Photoshop line tools

Generally, line tools do a pretty good job. First of all Photoshop line tool permit you to draw a straight line shape. Line tool helps Photoshop users to make use of lines to orient their object for making a well-formed design layout. For the newcomers of Photoshop usage, it will be very functional to know that, how can you use Photoshop line tools in various projects. You can use it in various ways depends on your project. If anyone wants to draw straight lines in photoshop, they have to use Photoshop line tools. It’s permitting you to draw a two-point line.

Pixels, paths, and vector shapes can be drawn by line tool in photoshop. Also, you can choose a shape mode for scalable or non-destructive lines. For rasterized content, you have to use pixel mode. Work on pictures, drawing lines in photoshop, or anything related like this content. Photoshop line tools are needed there too. Variously changing lines, there have a lot of options. Just select one and do work by this. To get the best output from a picture, sometimes Photoshop line tools carry a vital role. Making fascinating things and giving imagination in original, an artist has to use these line tools. Use this line tools and take your imagination into reality.

Why use Photoshop line tools

Draw line using Photoshop pen tools

Pen tool in Photoshop draws shapes and paths. Brush tool and pencil tool draw pixels in your photo or image but pen tools draw vector paths. Have to select the pen tool first from the toolbar on the left side in Adobe Photoshop. If your selecting tool is over, then in your canvas make a point from where you want the straight part to start also press for prescribe the first anchor point.

Choose where you want to finish the segment. Photoshop draw a line there automatically. The Curvature tool is a substitute to the pen tools that can make curves automatically. You can use it easily where, in the object, there are lots of straight lines. You make any angel within 45° with this tool. You can use this tool on a straight line picture too. Those are the various use of the Photoshop line tool. Not only this, the Photoshop pen tool is the most powerful and Usable tool in Photoshop. Pen tools allow an artist to create a shape with freedom. Hopefully, now you get a clear understanding of the pen tool that how useful it is, and how to draw straight lines in Photoshop. It is not only for selection and extracting details. You can use it for many other things in many other ways.

Last Words

You can draw a horizontal line in Photoshop with the usage of any of the photoshop tools above with the assistance of the Shift key. The Line Tool is created for drawing any line. Brush Tool permits you to make fancy strokes, and the photoshop pen tool is best when you need to mix straight lines with curve lines on an equal design. The Pencil Tool, honestly, I slightly use to paint lines, however in case you take place to be the, usage of it and simply need to draw a line.

How to Extend Background in Photoshop

by Silopath | Aug 31, 2021 | Basic Service

If you are keen on how to extend your background in photoshop, the following tutorial would be your starter pack. Why? Because it lets you use smart fill photoshop tools that are pain-free to learn. Most of the time, photoshop extends the photo to your likings, and it’s not noticeable to the bear eye.

You have different tools and options within Photoshop to extend photos of every category. Well, each of the tools is self-explanatory, and you would get enough fun learning them out. The extended smooth background would be eye-pleasing, and it would feel like magic. Let’s start with the step-by-step guide right now.

How to extend background in photoshop

The photoshop extend background feature lets you extract your image background in a seamless fashion. Thus, you could learn the process of photoshop how to extend the background process real quick. You could open up the image and use the photoshop change canvas size option using the useful submenu.

The canvas size window is the most helpful. It would provide you all the options as to which direction you want to fill photoshop. For example, if you’re going to stretch the photoshop background to the right, you could do so within a few steps. With relativity options, unchecked you could extend the background without distorting the entire image. It would stretch the entire background. However, learning Photoshop content-aware fill extend background is a crucial factor. You should also learn how to use a content aware scale that would help you to get even better results for how to extend background photoshop.

How to extend canvas in photoshop

If you want to extend your image canvas using photoshop background filling techniques, the following tutorial would be a lot helpful. It lets you remove the background without any sort of hassle altogether. The tutorial would go on how to content-aware scale on any images you want.

Extending canvas on Photoshop works great for any kind of image you are going to apply the effect. From personal portraits to commercial products, photography backgrounds for photoshop neck joint & manipulations are always in demand. So, you must acquire the knowledge and skill that would let you perform the amazing canvas extension trick.

Step :1 Open your product image to need to extend background

This first step on how to extend background in photoshop. Open up your product image or others on Photoshop. Opening files on Photoshop is fairly straightforward. Just go to File> Open and select the File you want to open. It’s the same for almost every photoshop extended version.

Step : 2 Unlock the image layer

As you have to unlock the layer in photoshop, Go into the Layer panel located at the right of the interface. Then click on the lock icon, and it would unlock the photoshop layer. Thus, you are free to extend the background.

Step : 3 Adjust canvas size photoshop

At the final step how to extend background in photoshop, go to image> Canvas size. Afterward, to change photoshop canvas size, you have to click on the arrow that is opposite to the direction you want to stretch the background. Uncheck the Relative box and start increasing the weight value. It would let Photoshop resize canvas in a perfect way.

Step : 4 Fill the extended canvas using Content-Aware

However, extending the background to a certain direction leaves a transparent background pattern on that area. As the best workaround, you could use the content-aware scale feature of Photoshop. It’s a great option and works great in many instances. Let’s get to know how to do it. Even though content-aware scale online tools are available, but oftentimes they are often inaccurate. So, it’s better to try out yourself as it’s smooth to follow up.

However, extending the background to a certain direction leaves a transparent background pattern on that area. As the best workaround, you could use the content-aware scale feature of Photoshop. .

Step : 5 Final

It’s a great option and works great in many instances. Let’s get to know how to do it. Even though content-aware scale online tools are available, but oftentimes they are often inaccurate. So, it’s better to try out yourself as it’s smooth to follow up

Fixing or color matching with brush tools

How to extend background in photoshop with brush tools. You could recreate a matching color background at the back of your photograph models. Or you could use the same mechanism on different types of images as well. It would let you fix up the background of the extended part of the image. The brush tool of Photoshop enables you to fill up the extended canvas with the color you think is best. Among all other tools, the brush works great on different aspects.

The brush tool is a lesser-known yet effective color correction photoshop background creation tool. If you could handle the brush tool and follow the correct step, it would make up the extended part. In case other well-tested tools are failing, checking out the following process would help you up. Let’s start the process.

Step : 1 Open your model images and unlock the layer

The first step is to open your image model file on Photoshop software. You could go into File> Open and navigate the path your image is placed on. Once you get to see your image on the Photoshop interface, it’s now open. Afterward, you have to unlock the layer in Photoshop. Click on the lock icon pressing Alt, and it would unlock the layer.

Step : 2 Adjust canvas size using cropping tools

It’s time to adjust the canvas size on how to extend background in photoshop. First, you have to determine in which direction you want to extend the canvas. Thus, click on any of the cropping tools or simply press “C” on the keyboard. It would activate the cropping tool. As you get the cropping interface, just drag the corner to the direction you want to extend the canvas.

Step : 3 Make the darker area near the top to ground of the frame

As most of the model photographs consist of a studio, you get the traditional settings. So, first, create the darker areas towards the top and the bottom of the canvas. It would let you get the natural-looking background you are aiming for. Use a brush tool to create the effects on your image background. Right-click on the canvas, select the larger brush, and lower brightness. Then sample the background color using Alt+Click on the color itself. Also, make sure to work on a new layer. To create it, press Ctrl+J. It would help you to create a seamless backdrop.

Step : 4 Make a natural gradient replicating shadows from the original photos

At last, you have to create a natural gradient or photoshop drop shadow at the backside of your photoshoot subject. You could create a fantastic natural gradient descent on your photos. As a result, the shadow and new background would blend in a great way. As most image subjects reflect shadow in the studio, you could erase it and create a new one using a brush tool.

fixing-or-color-matching-with-brush-tools

Extend your background using Marquee Tool

How to extend background in Photoshop on using Marquee tool. If you want to learn how to extend background in photoshop without affecting your image’s subject, the marquee tool is the answer. You could use both tools at once. The photoshop marquee tool lets you select the portion of your background you want to use. Then it gets easy and faster to extend the background.

Step : 1 Open your raw photography images and unlock the layer

First, open your image on Photoshop and then unlock the layer of the picture. As you load the raw photography file, it stays in locked mode by default. So, Alt+Click on the lock icon to unlock it.

Step : 2 Create canvas size using cropping tools

Use the Canvas tool or press “C” to extend the canvas to your preferred direction. Make sure you stretch the canvas grid in the correct direction. Don’t overdo the stretching of canvas, and everything would be in its place.

Step : 3 Expanding your canvas size, select the Marquee Tool

Once done, select the marquee tool photoshop or press “M.” Then select the portion of the image you want to stretch using the rectangular marquee tool. Be careful not to select the subject of your image

Step : 4 After selection edit with content-aware scale

Now go into the Edit > Content-Aware Scale from the top menu bar. Click on the edge of the photoshop marquee tool selected area and drag it into the empty part of the canvas. It would stretch up the background using the selected portion of your background. The function is a fine autofill photoshop tool. If you are still feeling shaky, you could follow real-time content-aware scale online tutorials.

Step : 5 Deselect canvas your selection and crop any extra empty spaces

Then click on the Ctrl+D to deselect the selected area, or choose right click > Deselect. In the end, if any empty parts are left on the canvas, use the Crop tools to remove them. Using the crop tools in photoshop, you could cut out the extra photo canvas portion within a few seconds.

Get Free Trial

Get Professional photo editing service at an affordable price. If you want to judge our work quality please send a free trial of 2/3 images.

Which tools are best for photoshop extend

By contrast, each of these tools has a different workflow and effectiveness. As both of these tools are always available on your hand, it’s up to you how to use these weapons. But, which tool is the best for Photoshop to extend the background process? Let’s find out the answer right below.

Marquee Tool vs. brush tools

In this section, I will discuss this step which method is best for how to extend background in photoshop. First, let’s come onto the marquee tool. It’s a set of tools that enables you to use the power of swept selection. The marquee tool even helps you get the perfect outcome of the screeching background process. Other hands, brush clearing tools offer you to paint up the extended background full of your creativity.

The short answer is that the combination of Marquee Tool and content-aware photoshop feature lets you get the best-extended background. And yet, the brush tool needs some sort of skill to make up the background with perfect hue and shading.

Conclusion

Learning the process of expanding background Photoshop is easy and straightforward. But it would help if you had a little bit of practice to get used to the flow. And yet, it’s worth your try as you get to stretch your image background. Photoshop has all the tools and functions ready to let you extend the background without distorting the image itself.

So, don’t hold back the willingness to learn how to extend background in Photoshop. The mentioned tricks are great, and they would help you in your personal or professional photography career. You could edit the background and stretch it to the point you wish to be. This is the best practice of extends background. For Product photography and model photography some times need to white background and transparent background.

How to turn a photo into a line drawing

by Silopath | Jul 30, 2021 | Tips

Welcome to our new photoshop tutorial article from which you can learn how to turn photo into line drawing. Turning a photo into a line drawing provides a pencil sketch-like effect that can enhance the viewing experience of your image. However, illustrating a picture and making a line art drawing requires skills and expertise. Both of these do not come for free, but finding the right person can sometimes make you sweat also.

But fortunately, learning how to turn a photo into a line drawing in adobe photoshop cc 2021 is relatively easy. See the following steps, and with enough practice, you can master the line art drawing technique as well.

White background product photography is the best fit category for line drawing. However, before turning a photo into a pencil sketch in Photoshop, selecting the right image is essential.

What is line drawing?

Line drawing is an art that consists of lines, curves and creates the shape of the subject without any drop shadow photoshop and colour in the image. Line drawing art is more like a pencil sketch of an image. So if you love pencil sketches like me, then knowing how to turn photo into line drawing will make your image editing experience more enjoyable. You can use any image, but if you are an eCommerce retailer, photoshop clipping path company using your product photo to line drawing will give you a unique set of images.

How to outline an image in photoshop?

To outline an image in photoshop, all we need is a selection tool. Photoshop outline effect helps make the selected area pop and draw attention to the area or subject quickly. Let’s know how to outline an image in photoshop below.

After inserting the image, the next step is to make a selection around the area or subject that we want to create the outline for. In photoshop, we can select the subject using different selection tools such as the Object Selection Tool, Pen Tool, Magic Wand Tool, etc. Using these tools is easy, and most of them are automatic. For now, we will use the object selection tool to select our subject. First, find the selection tool from the left toolbar and select it. Next, bring the cursor on the image, left-click on your cursor and drag the cursor over the subject then release.

The object selection tool will create a rectangular area over the subject. Then, after you release the cursor, the tool will detect the edge of the subject and make the selection by creating paths around it.

From the menu bar of the object selection tool, select subject select and then, by clicking on the active layer, create a duplicate layer of it. Then double click on the newly created layer, and from the popup menu, select Stroke and set the position option to Outside.

Set the fill color to whatever you line, and then increase the Stroke by using the size slider. Creating an outline is ready, and now you can use it wherever you want. To pop any area or subject in your image, outlining it is the best idea. To outline an image in photoshop, we first have to open the image we want to edit.

Step by step guide on how to turn photo into line drawing

Turning photos into line drawing requires basic knowledge of photoshop. If you don’t know about photoshop, then I would suggest you learn about the essential tools of photoshop. Nevertheless, this step-by-step guide on turning a photo into a line drawing will contain some advanced level of image editing skills. In this guide, I will try to explain the photoshop tools I will use also.

Finding the image that will fit the line drawing technique is quite tricky. So judging which image will go is also a skill that you should consider adopting as early as possible. Product photos can be an excellent choice for line drawing as photographers focus on the most delicate detail while shooting. Now, let’s start our article to turn photos into line drawing without wasting any more time.

Step-1: Open your eCommerce photography in photoshop

We will select the image we want to edit and insert it in the photoshop dashboard in the first step. To insert your image go to the File menu, then click on the Open option, and a window will appear. Find your image, select it from the window, and hit the Insert button to open it in photoshop. You can use a shortcut to drag the image and drop it on the artboard of photoshop.

Step-2: Create duplicate layer and setup layer

After inserting the image, the first thing that we must do is to create duplicate layers to avoid any issue whatsoever. In this tutorial, we will use three duplicate layers, which we will create in a while. To create the duplicate layers, go to layer and click on the Duplicate Layer. Repeat the technique twice to make three duplicate layers.

Step-3: Convert the image to grayscale using an adjustment layer

Now we will select the top layer to make turn photo into line drawing. go to the Adjustment Layer that we will find right at the bottom side of the layer panel. After clicking on the adjustment layer, a window will pop up, and from there, we will select the Hue/Saturation option.

As we have selected the hue and saturation for the top layer, every layer underneath will also get the changes. Now go to the Properties option, and there you will find three sliders called Hue, Saturation, and Lightness.

We will change the Saturation slider and make it -100. Now our image will look like grayscale, and we will go to the next step after that.

N.B.: You can convert your image into grayscale mode by using the image menu on the top. Go to image> Mode > Grayscale, and the image will convert into grayscale like magic.

Step-4: Convert photo to line drawing

We will create an outline of our image to turn photo into line drawing. Learning how to create an outline of an image in photoshop will help you in other photo editing tasks. And if you only want to create an outline of your image, then you can discontinue this tutorial after this step.

From our three duplicate layers in this step, we will use the first duplicate layer and make invisible the other two. To make the layer hidden, all you need to do is click on the eye icon on the left side of your layers. After making the upper two layers invisible, click on the remaining duplicate layer and change the settings from Normal to Color Dodge.

Now we will invert every change we have made till now, and to do that, you can directly press Ctrl+I or go to image> Adjustments, then select the Invert option.

adjustments-then-select-the-Invert-option

It’s time to select the Gaussian Blur and to do that, and you can select Filter> Blur and then click on the Gaussian Blur option from the menu bar.

A window with the settings of the gaussian blur will pop up, and from there, first, make sure that the preview option is enabled. In the window, you will see a slider called Radius. Change the slider until you see your image gets the line drawings effects.

Step-5: How to create the strokes of your line drawing thicker in Photoshop

To make the line drawing thicker, we need to use stroke settings in photoshop. To make turn photo into line drawing thicker, we need to create another duplicate layer from the original layer. Drag the layer up and take it above our first duplicate layer because we have selected colour dodge blend mode for this layer.

Now click on the Filter> Filter Gallery, and from there, choose glowing edges from under the Stylize option. Play with the Edge Brightness as this slider helps to get a cleaner edge and hit OK.

how-to-create-the-strokes-of-your-line-drawing-thicker-in-Photoshop

Now invert our changes again by pressing Ctrl+I and use Multiply as the blend mode of this layer. Our line drawing will be thicker than before after this step.

Step-6: Set your Background and Foreground Colors to turn photo into line drawing

In this step, we will change the background and foreground colour from the left toolbar. To change the colour, double click on the icon and a Color Picker window will pop up. From there, you can select any colour you want.

We will set the background colour to white and the foreground colour to light grey using the color picker window. To change both fields’ color, we have to double click on both fields individually. This means when you go to change the background color, double click on the background icon and from the color picker window, take the selector to the upper left-hand corner and hit the OK button.

The same goes for the foreground color, which is double click on the icon, and from the color picker window, take the color selector midway down the left side and hit the OK button to confirm.

Step- 7: turn photo into line drawing need to Add Pencil Shading to your photo

We will select the layer above the current layer we were working on for this segment, but as we turned off the eye button of this layer, this layer is now in invisible mode. Click on the eye button to turn the layer on and make it visible.

Now to add pencil shading to the photo, you have to use the filter gallery. Go and click on the Filter from the top menu bar. Select the Filter Gallery from the drop-down menu.

From the Filter, gallery selects the Sketch folder and then click on the Charcoal filter to give your image the pencil shading.

Set the Charcoal Thickness, Detail, and Light/Dark Balance sliders according to your requirements. When you find the perfect spot for the sliders, hit the OK button to confirm the changes.

The last part of this step is to change the blend mode of the layer we are working on from Normal to Multiply

Step 8: Add a cross-hatching effect to your photo

Now we will add a cross-hatching effect to our photo, and for this, we have to go to the Filter Gallery again. Like step 6, click on the Filter option from the menu bar and select the Filter Gallery option from the drop-down menu

Pro Tip: As we have previously used the filter gallery option, you might see two filter gallery options in the Filter drop-down menu. Select the second option this time.

From the Filter Gallery window, select the Sketch folder again and click on the Torn Edge filter. Adjust the sliders of the Filter that are on the right side until you get the effect you want.

Step: 9 Adjust the sliders for the Graphic Pen

Staying in the Torn Edge settings, see at the lower bottom right-hand side. You will see a corner folded paper icon called New. Click on the icon, and you will get two Torn Edge names on the right-hand side.

Between the two Torn Edge, the bottom one will have another partner called Graphic Pen. Keep selecting the first Torn Edge filter, and then from the bottom two clicks on the Graphic Pen, select it.

Now use the graphic pen slider to make changes until you are satisfied, and before changing the slider, select the Stroke Diagonal to Left Diagonal. Hit the OK button to confirm the change you made.

Step: 10: Change the Layer Blend Mode

Change the Layer Blend Mode from Normal to Multiply for this layer like the previous one. You can play with the settings and practise whenever you are free to learn the operations of these tools.

Step: 11: Add Motion Blur to make turn photo into line drawing

Now we will add motion blur to the layer we have recently worked on. To add the motion blur to our layer, go to Filter> Blur and select the Motion Blur option.

As soon as you select the motion blur option, a dialogue box will pop up. From there, set the Opacity and adjust the Distance slider according to your requirements. When you are done, hit the OK button.

Pro Tip: Check the preview box to see the changes in real-time.

Step: 12 Adjust opacity of layers of image

If the result that came out after step 11 feels satisfying, you can skip this step. But if it didn’t, then the reason must be the intensity of the pencil shading being high. To reduce it, adjust the Opacity of the layers. I kept the percentage to around 60% for the top layer and around 70% for the next one for my

Pro Tip: keep the Opacity of the bottom two layers intact, or the line drawing will reduce along with the Opacity.

Step 13: Clean up any artifacts to make turn photo into line drawing

Last but not least, cleaning up the artefacts can bring the flawless perfection you were looking for from the start. To remove any dark spots and dust, merge all the layers into one by pressing Ctrl+A+E. This layer is also called the stamped layer.

Set the background color to white and select the brush tool from the left toolbar. Paint over the spots and smudges to remove them in photoshop.

By doing this, you have successfully turned a photo into a line drawing and ready to use it on online platforms

Purpose of use turn photo into a line drawing

Before you turn a photo into a line drawing, you must know the purpose of use. Line drawing a photo will provide a pencil sketch-like look, and these images can offer a premium artistic vibe.

A line art image can enhance the reputation of your brand if you use it properly. People love to watch unique images, and so they will appreciate this new idea. So retailers and photographers can adopt this unique idea without any doubt. For personal use, turning a photo into a line drawing should not be any surprise because of its benefits. It enhances the style of your image and attracts more eyes than ever.

Get Free Trial

Get Professional photo editing service at an affordable price. If you want to judge our work quality please send a free trial of 2/3 images.

Conclusion

Learning how to turn photos into a line drawing will help you work on your personal images without hiring any outsiders. In this photoshop tutorial, you will find the detailed image editing process for the line drawing technique. On top of that, if you have ever wondered or wished to be able to make a pencil sketch of yourself, then after reading this article, I am sure you can. Practice makes a man perfect, which means that you have to practise multiple times if you want to master this technique.